High Speed Motor: Compatible with EVO sliders and Motion controller
High Torque Motor: Not compatible with the EVO Motion controller. Due to the motor driver in the EVO controller hardware, we are unable to run the gear-reduced high torque motor at a sufficient speed and noise level to be compatible. Compatible with Arc II only.
If you want to use Rhino Arc II and the High torque motor with your EVO slider, we suggest upgrading your drive shaft end plate which has a stronger pulley allowing for vertical shots. If you don't upgrade, there is some risk of the pulley slipping or coming loose on an incline or vertical shot. You can purchase an upgraded Drive Shaft End Plate here.